| No. | Brand | H | d | A | G | T | h | a | D |
| UCWTPL206MZ2W | AMI | - | 280 mm | - | - | - | - | - | - |
| UCWTPL207-22MZ2RFW | AMI | - | - | - | - | - | - | - | - |
| UCWTPL207-23MZ2W | AMI | - | 530 mm | - | - | - | - | - | - |
| UCX10 | AMI | - | - | - | - | - | - | - | - |
| UCX13-40 | AMI | - | 431.8 mm | - | - | 336.55 mm | - | - | 571.5 mm |
| UCX10-32 | AMI | - | - | - | - | - | - | - | - |
| UCST210-30TC | AMI | - | 80 mm | - | - | - | - | - | - |
| UCST210-32TC | AMI | - | 110.000 mm | - | - | - | - | - | 200.0000 mm |
| BTM206-20TCMZ2 | AMI | - | 80.000 mm | - | - | - | - | - | 125.0000 mm |
| UCST207-20TC | AMI | - | 17.000 mm | - | - | - | - | - | 40.0000 mm |
| UCX16-51 | AMI | - | 80.000 mm | - | - | - | - | - | 170.0000 mm |
| UC205-16C4HR23 | AMI | - | - | - | - | - | - | - | - |
| UCST212TC | AMI | - | 15.000 mm | - | - | - | - | - | 35.0000 mm |
| UCST210-31NPMZ20 | AMI | - | - | - | - | - | - | - | - |
| UCWTPL203-11W | AMI | - | - | - | - | - | - | - | - |
| UCST203-11TC | AMI | - | 120 mm | - | - | - | - | - | 210 mm |
| UCX18 | AMI | - | - | - | - | - | - | 43 mm | - |
| UCMFL206-20MZ20 | AMI | - | - | - | - | - | - | - | - |
| UCST208-25TC | AMI | - | - | - | - | - | - | - | - |
| UCX12-39 | AMI | - | 40.000 mm | - | - | - | - | - | 90.0000 mm |
| UCST207TC | AMI | - | 140 mm | - | - | - | - | - | 215 mm |
| BTM207-22TCMZ2 | AMI | - | - | - | - | - | - | - | - |
| UCMFL202MZ2 | AMI | - | 17.000 mm | - | - | - | - | - | 40.0000 mm |
| UCST205-16TC | AMI | - | 40.000 mm | - | - | - | - | - | 68.0000 mm |
| AMI UCMFL206-20MZ20 Mounted Units & Inserts | D2:31.2 mm; Static axial stiffness, preload class C:39 N/µm; Da max.:33 mm; Preload class A GA:30 N; rb max.:0.15 mm; ra max.:0.3 mm; Ball diameter Dw:5.556 mm; Calculation factor f0:7.2; Static axial stiffness, preload class A:18 N/µm; Calculation factor fHC:1; |
| AMI UCX15-47 Mounted Units & Inserts | Calculation factor f2D:1.17; D:68 mm; Calculation factor fHC:1.04; Calculation factor e:0.68; Calculation factor (back-to-back, face-to-face) Y2:1.41; a:19.3 mm; Calculation factor f2C:1.12; rb max.:0.3 mm; Da max.:64.8 mm; D1:60.4 mm; |
| AMI UCX09-28 Mounted Units & Inserts | Grease Speed Rating n1:5000 rpm; Basic Static Radial Load Rating Co:65500 N; B:36.50 mm; Basic Dynamic Radial Load Rating C:67100 N; Accessories:Two Seals & Snap-Rin; d:40.000 mm; Fillet Radius ra:1.50 mm; D:90.0000 mm; Oil Speed Rating n2:6700 rpm; Sealed Speed Rating n3:5000 rpm; |
| AMI UCX12-39 Mounted Units & Inserts | Accessories:Two Shields & Snap-R; D:90.0000 mm; d:40.000 mm; Basic Static Radial Load Rating Co:36000 N; Fillet Radius ra:1.50 mm; Oil Speed Rating Open/Shielded n2:7500 rpm; B:23.00 mm; Grease Speed Rating Open/Shielded n1:6200 rpm; Basic Dynamic Radial Load Rating C:46800 N; |
| AMI UCX17-52 Mounted Units & Inserts | D1 ≈:508 mm; d1 ≈:450 mm; Calculation factor Y2:3.3; Calculation factor Y0:2.2; Fatigue load limit Pu:1220 kN; B:437 mm; d:420 mm; Thrust factor K:1.88; Basic dynamic load rating C:5830 kN; Calculation factor e:0.31; |
| AMI UCST207-22TC Mounted Units & Inserts | with tapered bore:240 min-1; Static (Cor):22.3 mm; Grease:11150 kN; Oil:822.160 kN; rs (min):6 mm; d:400 mm; B:250 mm; with cylindrical bore:180 min-1; Dynamic (Cr):12 mm; D:650 mm; |
| AMI UCST208-25TC Mounted Units & Inserts | Dimension D3:28.20 mm; Basic Dynamic Radial Load Rating:10600 N; Outher Width C:14 mm; Weight W:0.14 kg; Outside Diameter D2:47 mm; Dimension S:12.7 mm; Set Screw Size SSS:M6*0.75*5; Bore Diameter D:20 mm; Basic Static Radial Load Rating Co:6550 N; Inner Width B:31.0 mm; |
| AMI UCX08 Mounted Units & Inserts | Basic Static Radial Load Rating Co:5400 N; B:24.00 mm; Basic Dynamic Radial Load Rating C:19000 N; D:62.0000 mm; Grease Speed Rating n1:7500 rpm; Fillet Radius ra:1.00 mm; d:25.000 mm; |
| AMI BTM207-23NP Mounted Units & Inserts | Da max.:329 mm; Lubricant:Maintenance free &nd; Mass plain bearing:40 kg; C:100 mm; α:8 °; Basic dynamic load rating C:7200 kN; D:340 mm; r1 min.:1.1 mm; Design (sliding contact surface combination):Steel/PTFE fabric; B:140 mm; |
| AMI UEWTPL208W Mounted Units & Inserts | Insert Bearing IB:ZMaRC; Dimension N:0.8281 in; Basic Static Radial Load Rating Co:3440 lbf; Distance JMAX:5.2500 in; Width A:1.7656 in; Dimension S1:1.0000 in; Distance JMIN:4.6875 in; Weight W:1.57 lb; Dimension H2:0.7500 in; Dimension A1:1.0625 in; |
AMI UCST211TC Mounted Units & Inserts Video
AMI Bearings Inc. | UCST211-32C4HR5 | UCST200C4HR5 Series ...
Shop AMI Bearings Inc. UCST211-32C4HR5 at Applied.com, which includes; 2" Shaft, 5 1/8" Between Frame Width, 1 1/16" Slot Width, Regreasable, Contact Seals, ...
UCST211TC OBSOLETO NO USAR 8/21 - AMI BEARINGS ... - BDI
Take Up Bearing Only; 55MM Bore; 27MM Slot Width; 130MM Slot to Slot Distance; Ball Bearing; Unit Only; Set Screw Mount; UC211 Insert Part; Teflon Coated Cast ...
AMI UCNST211TC - Bearings & Drives Inc
AMI UCNST211TC. 55MM WIDE SET SCREW TEFLON NARROW SLOT TAKE-UP. MPN: UCNST211TC; CPN: BDPN: 560137; UPC: 808250415328; Min Order Qty: 1; Quantity Interval: ...
Advanced Micro Instruments
AMI high performance Oxygen Analyzers, O2 Sensors, Deficiency Monitors are guaranteed to be higher quality with exceptional service at a lower price.
AMI UCST211TC Mounted Units & Inserts - NTN 6005lu Bearing
AMI UCST211TC Mounted Units & Inserts ; Ew: 46 mm ; Limiting speed: 12000 r/min ; U: 32 mm ; Mass needle roller and cage assembly: 0.076 kg ; Basic static load ...
AMI UCST211TC Mounted Units & Inserts - Timken jm511910 Bearing
AMI UCST211TC Mounted Units & InsertsTechnical information ; Basic dynamic load rating (C):, 43,8 kN, Bc: ; Bore Diameter (mm):, 68, Bearing number: ; Ew: 76 mm ...
AMI Archives - ECCO - Equipment Controls
Skip to content. ECCO is continuing to follow best practices as outlined by the CDC and other local health organizations to minimize the risk to our ...