| AMI UCWTPL207-22MZ2RFW Mounted Units & Inserts | Fw:26 mm; Basic dynamic load rating C:14.7 kN; Fatigue load limit Pu:3.25 kN; Basic static load rating C0:27.5 kN; Ew:30 mm; U:17 mm; Limiting speed:18000 r/min; Reference speed:16000 r/min; Mass needle roller and cage assembly:0.015 kg; |
| AMI UCMFL209-27MZ20 Mounted Units & Inserts | Basic static load rating C0:1660 kN; r1,2 min.:2.1 mm; Mass bearing (including seat washer where applicable):32 kg; H:60 mm; Basic dynamic load rating C:247 kN; D:600 mm; Da max.:543 mm; Limiting speed:950 r/min; Fatigue load limit Pu:26 kN; da min.:557 mm; |
| AMI UEWTPL207-20W Mounted Units & Inserts | Basic static load rating C0:27000 kN; D1 ≈:894 mm; d:690 mm; da max.:750 mm; B:365 mm; K:15 mm; Limiting speed:600 r/min; F:759 mm; Calculation factor kr:0.38; r3,4 min.:7.5 mm; |
| AMI BTM207NP Mounted Units & Inserts | rs (min):3 mm; r1s (min):2.5 mm; T:36 mm; Dynamic (Ca):185 kN; C:28 mm; D:140 mm; a:28 mm; Static (Coa):220 kN; d2:65 mm; Pu:26.630 kN; |
| AMI UCX11-36 Mounted Units & Inserts | r1,2 min.:4 mm; D:950 mm; Da max.:837 mm; Limiting speed:380 r/min; da min.:913 mm; Minimum axial load factor A:26; Reference speed:190 r/min; d1:946 mm; Basic static load rating C0:18000 kN; Mass bearing:120 kg; |
| AMI UCX10-32 Mounted Units & Inserts | B:20.904 mm; B1:87.782 mm; Threads per inch:12; Sleeve:S 24x4.1/8; Hydraulic nut:HMVC 24E; Lock nut:AN 24; Mass adapter sleeve assembly:3 kg; Lock washer:W 24; d1:104.775 mm; d3 max.:155.702 mm; |
| AMI BTM206NP Mounted Units & Inserts | Grease Speed Rating Open/Shielded n1:6300 rpm; Sealed Speed Rating n3:4300 rpm; Basic Dynamic Radial Load Rating C:61800 N; Grease Speed Rating n1:6300 rpm; B:27.00 mm; Oil Speed Rating n2:7500 rpm; Basic Static Radial Load Rating Co:38000 N; Accessories:Snap-Ring; d:50.000 mm; Oil Speed Rating Open/Shielded n2:7500 rpm; |
| AMI BTM206-19NP Mounted Units & Inserts | d1 ≈:225 mm; B2:22.5 mm; Mass angle ring:1.35 kg; B1:12 mm; d:190 mm; r3,4 min.:2.1 mm; |
| AMI UCMFL207-23MZ20 Mounted Units & Inserts | α:105 °; a:3 mm; d:20 mm; Tolerance housing:H7; Coefficient of friction µ max.:0.15; D:28 mm; Coefficient of friction µ min.:0.08; Permissible sliding velocity v min.:0 m/s; Tolerance shaft:e7; B:30 mm; |
| AMI UCWTPL207-20MZ2W Mounted Units & Inserts | J:113 mm; D:140 mm; Required attachment bolt size (DIN 912):M10; r3,4 min.:0.6 mm; ra max.:0.6 mm; Mass bearing:4.5 kg; da min.:63 mm; d2:76.1 mm; Attainable speed:1700 r/min; Da max.:98 mm; |